상품상세설명

High Torque Servo/Futaba J Connector/Metal Output Gear

Standard Parts

Dramatically increase the strength of your steering with the SFL-11MG servo, which is fitted with metal gears for extra power!

This is a 1/5th scale large-size servo with a surprising amount of power available: nearly 25kg-cm at 6 volts, making it ideal for single-servo control of the Baja buggy and truck front wheels!

Note: this servo requires a 25-tooth servo horn/arm, which may be different than the servo you are replacing in your HPI kit.

NOTE: NOT WATERPROOF! Before driving in wet conditions, make sure that all electronics fitted to the vehicle are safe to use (marked as water-resistant or waterproof), or that they are fully enclosed and protected from water and moisture (such as in a sealed receiver/battery case). Fans mounted on speed controllers are not water resistant - we recommend to disconnect the fan from the ESC before driving in wet conditions and allow it to dry fully before reconnecting the fan power. Lubricate exposed metal drivetrain parts such as bearings, outdrives and diff shafts before driving in wet conditions. Motors are not intended for submerged use and may be damaged if used when under water. After driving in wet conditions, make sure to rinse off dirt and any corrosive liquids like saltwater with plain water and re-lubricate metal drivetrain parts.

이 제품은 아래의 키트 / 제품에 적합합니다:

• Baja 5SC STD
• Baja 5T STD
• Baja 5b D-Box 2 STD
• Baja 5R 1970 Ford Mustang Boss 302 STD
• Baja 5B Sidewinder X5 STD
• Baja 5B TSk-b Class 1 STD
• Baja 5b SS Kit OPT