Kakute F722 Flight Controller

- 3030 사이즈 FC입니다.

- ICM42688P 자이로센서를 사용합니다.

- 9V/3A, 5V/2A BEC가 내장되어 있습니다.

- 디지털/아날로그 VTX 모두 사용 가능합니다.

- 간결하고 효율적인 구조를 갖고 있습니다.

구성

플라이트 컨트롤러 1개

Feature

High-performance STM32 F722 MCU with speeds up to 216MHz.

ICM42688P gyroscope, independent low-noise power supply.

Various Ports for quick & easy setup: ESC port, Digital VTX port, Analog VTX port, Receiver port, and LED port.

Built-in analog video OSD, 16 Mbytes black box,

High power synchronous rectifier BEC, supports up to 8S input and provides stable 9V/3A & 5V/2A output.

Specification

• MCU : STM32F722 32-bit processor, 216MHz, 256Kbytes RAM, 512Kbytes Flash

• IMU : ICM42688-P (SPI)

• Barometer : BMP280

• OSD : AT7456E

• 5x hardware UARTS (UART1,2,3,4,6)

• 7x PWM Outputs (6 Motor Output, 1 LED)

• Onboard 16 Mbytes for Blackbox logging

• Battery input voltage: 3S - 8S

• BEC: 9V/3A, 5V/2A, 3.3V/0.2A

• Connector
  2x JST-SH 8pin port for ESC

• 1x JST-SH 6pin port for HD VTX
  2x JST-SH 4pin port for Receiver & Analog Camera
  1x JST-SH 3pin port for LED
  

• USB Type -C

• Dimensions: 35x35mm

• Mounting Holes: Standard 30.5 x 30.5

• Weight: 8g

Firmware Targets

• Betaflight Target: KAKUTEF7MINIV3

• INAV Target: KAKUTEF7MINIV3

Package Includes

1x Kakute F722 Flight Controller

4x M3 Silicon Grommets

1x JST-SH1.0_8pin 150mm Cable (For ESCs)

2x JST-SH1.0_6pin 80mm & 150mm Cable (For DJI Air Unit)

1x JST-SH1.0_6pin Colored Silicon 150mm Cable (For Caddx HD System and other VTX)

1x JST-SH1.0_4pin to Dupont 150mm Cable

1x JST-SH1.0_3pin to Dupont 150mm Cable

1x JST-SH1.0_4pin to Molex1.25 150mm Cable