[팰콘샵] [TLR334000] O-Rings, Bleeder Shock Cap (8): TEN-SCTE /TEN-MT, 22

[TLR334000] O-Rings, Bleeder Shock Cap (8): TEN-SCTE /TEN-MT, 22

25. 자동차종류별 부품> LOSI&TLR 팀로시 부품> TEN-MT 부품, TEN-SCTE Troy Lee Designs 부품, TEN-SCTE 부품, TEN-SCTE 2.0 Kit 부품

일반가격 : 7,200 (회원 가입시 추가 할인)
적립금 : 70원

물류창고 :

재고 : 물류창고 5개있음

상품번호 : QQ92377 (※전화문의시 상품번호를 알려주세요)

[매진임박!] 현재 잔여 수량이 5개 밖에 없습니다!

바로구매

장바구니

상품후기

Virtual Assistant

Email Us

이미지	상품명	선택

기타 필요한 옵션상품 총합계: 0원

기타 필요한 옵션상품 총합계:
0원

옵션 상품을 포함하여 장바구니 담기 >

TLR334000 Bleeder Cap O-Rings

We have just released TLR334000 O-Rings, Bleeder Shock Cap (8): TEN to make shock building easier on the TEN and 22 series of vehicles.

Today, TLR users of the TEN series such as the SCTE or the 22 series vehicles typically run a shock without a bladder which is know as an emulsion type shock. Many use the bleeder based caps that we offer for these vehicles. This change applies to those using the metal bleeder caps and not those using the RTR or plastic bleeder caps. The bleeder caps come with an o-ring that you place inside the shock cap and then have to flip the cap over while keeping the o-ring in place, and tighten the cap to seal the shock. That o-ring after a while softens and can twist leading to a leaky shock. So, many have continued using cut out bladders as they seem to stay in place a little easier, although you cannot get them all perfect.

[팰콘샵] TLR334000 [TLR334000] O-Rings, Bleeder Shock Cap (8): TEN-SCTE /TEN-MT, 22