{
    "goodsno": 100086430,
    "name": "[BETAFPV] F4 2-3S 20A AIO V1 보드",
    "url": "https://www.falconshop.co.kr/shop/goods/goods_view.php?goodsno=100086430",
    "price_krw": 85000,
    "price_note": null,
    "in_stock": true,
    "brand": "BETAFPV",
    "model_number": "",
    "compatible_with": [
        "Pavo 시리즈 Pavo Pico",
        "Pavo 시리즈 Pavo20",
        "Pavo 시리즈 Pavo35",
        "Pavo 시리즈 Pavo Femto"
    ],
    "categories": [
        "드론 (멀티콥터) > 드론 종류별 부품 > Pavo 시리즈 > Pavo Pico 부품",
        "드론 (멀티콥터) > 드론 종류별 부품 > Pavo 시리즈 > Pavo20 부품",
        "드론 (멀티콥터) > 드론 종류별 부품 > Pavo 시리즈 > Pavo35 부품",
        "드론 (멀티콥터) > 드론 종류별 부품 > Pavo 시리즈 > Pavo Femto"
    ],
    "summary": "",
    "description": "**BETAFPV F4 2-3S 20A AIO FC V1**\n\n- BetaFPV사의 F4 20A AIO V1 보드입니다.\n\n- PAVO PICO와 PAVO20의 순정 보드입니다.\n\n- ELRS 수신기가 내장되어 있습니다.\n\n구성\n\n하단 사진 참조\n\nF4 2-3S 20A AIO FC V1 is specifically designed for HD VTX, utilizing 2-3S batteries for enhancing the flight experience.\n\nIt features a dual BEC solution that delivers stable power outputs of 9V@2A for DJI O3 and 5V@3A for external devices.\n\nWith a 20A ESC, it enables agile flight and increases dynamic. And connector for DJI O3 HD VTX and USB port for easy installation\n\nand maintenance. Ideal for HD VTX whoop enthusiasts, offering a heightened level of professionalism and convenience with this FC option.\n\n**Bullet Points**\n\n- Designed for HD VTX, it features a dual 9V@2A for DJI O3 and 5V@3A for external device BEC solution\n- to prevent screen blackout on the DJI O3 due to low voltage during throttle increase.\n- It includes a new DJI O3 6-pin PMU for easy installation without soldering, reducing assembly complexity. Newbie friendly.\n- The power range of 2-3S provides increased thrust and improved control with a 20A ESC featuring a single NMOS for continuous current capability.\n- The upgraded onboard receiver allows selective power cutoff for saving power and offers additional UART TX3 and RX3 ports for connecting the external device.\n- Redesigned solder pad layout ensures larger, more secure pads for easy and reliable soldering, while the relocated USB port at the rear facilitates computer tuning.\n- It features an STM32F405RGT6 chip, Integrate Serial ELRS 2.4G receiver, 16M black box, barometer, current meter,\n- reserve 3 complete serial ports and a standard SBUS, support GPS, HD VTX, external receiver, and other equipment.\n\n**Specification**\n\nWeight: 5.58g (without motor connectors and power cable),5.92g (with motor connectors)\n\nMounting Hole Size: 26mm x 26mm\n\nCPU*: STM32F405RGT6 (168MHz)\n\nSix-Axis: ICM42688P (SPI connection)\n\nRX: Serial ELRS 2.4G Receiver\n\nRX firmware version: BETAFPV AIO 2400 RX ELRS V2.5.2\n\nAntenna: Enameled wire\n\nBlackbox Memory: 16MB\n\nSensor: Barometer(BMP280),  Voltage&Current\n\n5V BEC*: 5V 3A@8V supply\n\n9V BEC*: 9V 2A@8V supply\n\nUSB Port: SH1.0 4-Pin\n\nBuilt-in ESC with 20A continuous and peak 25A current\n\nESC input voltage: 2-3S\n\nFC firmfware version: Betaflight_4.4.1_BETAFPVF405\n\nESC firmware: C_X_70_48_V0.19.2.hex for BB51 Bluejay hardware\n\nSignal support: D-shot300, D-shot600\n\n*The output current of BEC will decrease as the temperature increases\n\nDiagram\n\nBelow is the diagram for F4 2-3S 20A AIO FC V1.\n\nComparison\n\nWe upgraded the FC from F4 1S 12A AIO FC V3 to F4 2-3S 20A AIO FC V1. The upgraded FC features an ESC with a\n\npulse overcurrent capacity of 25A, ensuring stable operation of the flight controller even in the event of motor stalling.\n\nThe addition of a 9V 2A BEC power supply ensures the stable operation of the DJI O3 HD VTX when the battery voltage is low.\n\nIt also includes a DJI O3 6-pin PMU allowing for connection to HD VTX without soldering.\n\nIt integrates features such as a 16MB black box, with support for GPS, external receivers, and other devices.\n\nThe redesigned solder pad layout and USB connector make installation and maintenance easier and more convenient.\n\n|  | F4 1S 12A AIO FC V3 | F4 2-3S 20A AIO FC V1 |\n| --- | --- | --- |\n| Weight | 4.23g | 5.58g |\n| BEC | 5V@3A for External RX | 5V@3A for External RX 9V@2A for DJI O3 |\n| Connector for DJI O3 | Not support | Support |\n| ESC Current | 12A | 20A |\n| ESC Input Voltage | 1-2S | 2-3S |\n| Number of Serial Ports | 2*UART, 1*SBUS | 4*UART, 1*SBUS |\n\nNote: If you use the F4 2-3S 20A AIO FC V1, the serial port of the SBUS receiver is UART5 while F4 1S 12A AIO Brushless FC V3 is UART6.\n\nF4 2-3S 20A AIO FC V1 also has extended the USB port to the end for easier parameter adjustment and wiring.\n\nAnd a new DJI O3 6-pin PMU has been added for convenient installation and maintenance.\n\nFAQ\n\nPower cutoff : Removing the chip bead disconnects the power supply, and to reuse the onboard ELRS receiver, soldering the solder pads together restores power.\n\nUART3 release : Removing two resistors on the solder pads releases UART3. The left side is TX3, and the right side is RX3.\n\nTo reconnect, solder the solder pads together when reusing the onboard ELRS receiver.\n\nVoltage Switch: The HD VTX connector defaults to 9V. The chip bead is soldered between the 9V pad and the middle pad.\n\nTo use WalkSnail Avatar HD mini 1s and Lite, please ensure the power supply voltage is 5V.\n\nRemove the chip bead first from the 9V pad and solder it between the middle pad and the 5V pad.\n\nAlternatively, you can use solder instead the chip bead to switch between the 5V and 9V pads.\n\nMotor choice: Avoid selecting motors with excessively high KV ratings, as motors above 20,000KV are prone to burn.\n\n**Betaflight Firmware and CLI**\n\nFC firmware: Betaflight_4.4.1_BETAFVF405 : Download the firmware and CLI dump file\n\nReference link : https://github.com/betaflight/betaflight/releases/tag/4.4.1\n\n**ESC Firmware**\n\nWith BB51 ESC\n...",
    "images": [
        "https://www.falconshop.co.kr/shop/data/goods/fm100086430_1792211200.jpg",
        "https://www.susungrc.com/web/upload/NNEditor/20240426/F4-2-3S-20A-AIO-FC-V1_5.jpg",
        "https://www.susungrc.com/web/upload/NNEditor/20240426/F4-2-3S-20A-AIO-FC-V1_6-2.jpg",
        "https://www.susungrc.com/web/upload/NNEditor/20240426/F4-2-3S-20A-AIO-FC-V1_7.jpg",
        "https://www.susungrc.com/web/upload/NNEditor/20240426/F4-2-3S-20A-AIO-FC-V1_8.jpg",
        "https://www.susungrc.com/web/upload/NNEditor/20240426/F4-2-3S-20A-AIO-FC-V1_9.jpg",
        "https://www.susungrc.com/web/upload/NNEditor/20240426/F4-2-3S-20A-AIO-FC-V1_10.jpg",
        "https://www.susungrc.com/web/upload/NNEditor/20240426/F4-2-3S-20A-AIO-FC-V1_11.jpg",
        "https://cdn.shopifycdn.net/s/files/1/1778/6615/files/lQLPJxTnULfHybJjzMOwUJ_ThDZUXdIEUYcD0sDOAA_195_99_240x240.png?v=1683621261",
        "https://www.susungrc.com/web/upload/NNEditor/20240426/F4-2-3S-20A-AIO-FC-V1_11-2.jpg",
        "https://www.susungrc.com/web/upload/NNEditor/20240426/F4-2-3S-20A-AIO-FC-V1_12.jpg"
    ],
    "shipping": "Korea: free over 50,000 KRW, otherwise 3,500 KRW",
    "rating": null,
    "reviews": [],
    "qna": []
}