{
    "goodsno": 100091945,
    "name": "[TBS] LUCID H7 플라이트 컨트롤러",
    "url": "https://www.falconshop.co.kr/shop/goods/goods_view.php?goodsno=100091945",
    "price_krw": 89000,
    "price_note": null,
    "in_stock": false,
    "brand": "TBS",
    "model_number": "",
    "compatible_with": [],
    "categories": [
        "드론 (멀티콥터) > 드론 비행 컨트롤러 > 레이싱 드론용 비행 컨트롤러 > H7 레이싱용 비행 컨트롤러"
    ],
    "summary": "Betaflight, ArduPilot, INAV",
    "description": "**TBS Lucid H7 Flight Controller**\n\n- TBS사의 3030사이즈 FC입니다.\n\n- ICM42688 자이로를 사용합니다.\n\n- Betaflight, ArduPilot,  INAV펌웨어를 지원합니다.\n\n- 듀얼카메라 입력이 가능합니다.\n\n- 6~36V (2S~8S) 입력전압을 지원합니다.\n\n\n구성\n\n하단 사진 참조\n\nThe TBS Lucid H7 FC is a powerhouse built for those who crave peak performance and adaptability in their drones.\n\nWhether you're ripping through freestyle moves or fine-tuning a racing rig, the TBS Lucid H7 delivers with its\n\nrobust 480MHz processor and seamless support for Betaflight, ArduPilot, and INAV. Featuring dual camera inputs,\n\nDJI FPV OSD compatibility, and a compact design, it fits effortlessly into any setup.\n\nDesigned for both seasoned pros and enthusiastic newcomers, this flight controller makes pushing the limits of your drone easier than ever.\n\nSpecification\n\nMCU: STM32H743VIH6 running at 480MHz, with 1MB RAM and 2MB Flash.\n\nGyro: ICM42688 x 2 (duo gyro)\n\nOSD Chip: AT7456E (SPI2)\n\nBarometer: Infineon DPS310 connected via I2C2.\n\nPWM Outputs: 13 channels, including a dedicated “LED” pad.\n\nBlackbox (BB): Data logging equipped with a MicroSD card slot (SDIO)\n\nUARTs: 7 total (1, 2, 3, 4, 6, 7, 8) signal inversion ready\n\nI2C Buses: 2 available.\n\nCAN Bus: 1 available.\n\nAnalog Inputs: 6 ADC channels (VBAT, Current, RSSI, Analog AirSpeed, Vbat2, Cur2).\n\nLED Indicators: 3 LEDs (Blue, Green for FC Status, Red for 3.3V Power).\n\nBreakout: SPI3 breakout available.\n\nUSB Interface: Type-C connector (USB 2.0 standard).\n\nJST Connectors:\n\n1x JST-SH1.0 8-pin (Vbat/G/Curr/Rx8/S1/S2/S3/S4)\n\n1x JST-GH1.25 4-pin (5V/CAN-H/CAN-L/Ground).\n\nDual Camera Input: Switchable inputs for two cameras.\n\nPower Control: Switch for filtered 5V/Vbat output power.\n\nDJI FPV OSD: Compatible via any spare UART port.\n\nPower Specifications\n\nInput Voltage: 6 - 36V (2 to 8S LiPo).\n\nBEC: 5V 2A continuous (3A max) & 9V 2A continuous (3A max)\n\nLDO 3.3V: Supports up to 200mA.\n\nVoltage Support: ADC Vbat2 pad supports up to 36V (1K:10K voltage divider).\n\nPower Consumption: 200mA @ 5V with Betaflight, 150mA @ 5V with ArduPilot.\n\nFC Firmware Targets\n\nArduPilot: tba\n\nBetaFlight: TBS_LUCID_H7\n\nINAV: TBS LUCID_H7\n\nIncludes\n\nTBS Lucid H7 FC\n\nFC-to-ESC cable (plug & play)\n\nDJI O3 cable (plug & play)\n\n4pcs M3 rubber dampers\n\n4pcs M3x8 screws\n\n",
    "images": [
        "https://www.falconshop.co.kr/shop/data/goods/fm100091945_1792398713.jpg",
        "https://www.susungrc.com/web/upload/NNEditor/20250214/TBS-Lucid-H7-FC_1.jpg",
        "https://www.susungrc.com/web/upload/NNEditor/20250214/TBS-Lucid-H7-FC_2.jpg",
        "https://www.susungrc.com/web/upload/NNEditor/20250214/TBS-Lucid-H7-FC_3.jpg"
    ],
    "shipping": "Korea: free over 50,000 KRW, otherwise 3,500 KRW",
    "rating": null,
    "reviews": [],
    "qna": []
}