① 99.9% 실재고 관리매일 밤 자동 갱신, 유령 재고 NO! 보이는 수량이 진짜입니다.
② 22년 전문가 직답국내 최고 전문가가 막힘없이 즉시 해결해 드립니다.
③ 확실한 기술 지원국내 최고 수준의 노하우로 막힘없는 솔루션을 제공합니다.
④ 출고 전 전수 촬영출고 전 제품 사진 기록으로 오배송 및 누락을 원천 차단합니다.
⑤ 실시간 배송 일정주문 확인 즉시 발송 예정일을 카톡으로 먼저 알려드립니다.
⑥ Since 2004 신뢰22년을 한결같이 지켜온 믿음. 걱정 없이 이용하세요.
This is the 5 Turn Hobbywing Xerun V10 G3 Competition Modified Sensored Brushless Motor. The V10 G3 Motor line has seen significant improvements over the previous G2 series, for both the Modified and Stock motors. Some updates include an updated can design that promotes easy of maintenance, a special shell design for maximized cooling, high-performance stator core, heat-resistant wire (200°C), lower weight and more.
Features:
Specially designed for high-level racing.
Lightweight: The G3 Modified & Stock motors only weigh 161g & 132g respectively, the weights are reduced by 11% & 21% when comparing with the V10 G2 motors.
The built-in high precision Hall sensor combined with the high precision and balanced rotor guarantee outstanding linearity of the motor.
The mechanical timing can be adjusted finely and smoothly; the skid-proof lines on the rear end plate of the motor guarantee stability of the timing after adjustment. For G3 Stock motors (10.5T~25.5T), the timing is adjustable from 30 degrees to 60 degrees; for Modified motors (3.5T~8.5T), the timing is adjustable from 20 degrees to 50 degrees.
The motor case is designed to be easy to dismantle for maintenance purposes and for the replacement of common wearing parts.
The special shell design which makes the stator core expose to the air maximizes cooling. Big holes on the end plates of 10.5T~21.5T motors further help reduce heat; small holes on the end plates of 5.5T~8.5T motors effectively keep sand or dirt from getting inside and damaging the motor(s).
The use of high-performance stator core, heat (200°C) resistant wire, heat (200°C) resistant rotor with strong structure, imported high precision and high strength bearings, and copper solder tabs with super current endurance guarantees outstanding performance and super durability.
Specifications: kV: 6500 LiPo: 2S Resistance: 0.0026 No-Load Current (A): 5.5 Max Output Power (W): 443 Current @ Max Output Power (A): 118 Diameter/Length (mm): 35.9mm (1.41in)/51.2mm (2.01in) Shaft Diameter/Length (mm): 3.17mm (0.125in)/13.3mm (0.52in) Stock Rotor: 5-12.3 Sensored: Yes Brushless: Yes Poles: 2 Weight (g): 159 Applications: Modified 1/10 & 1/12 On-Road
하비윙 변속기 A/S 정책 안내
● 저희 팰콘샵에서 구입하신 국내 정식 수입된 하비윙(Hobbywing) 변속기 제품에 대하여 워런티(Warranty) 적용이 가능합니다.
● 초기불량 정의 : 제품이 한 번도 작동하지 않을 경우 '초기불량 의심' 상태이며, 팰콘샵에서 점검 후 '초기불량 확정' 유무가 판정됩니다.
● 초기불량이 아닌 경우 : 제품이 작동하다가 고장난 경우, 제품에 탄 흔적(또는 냄새)이 있는 경우, 제품을 개조(배터리 잭 단자 변경 포함)한 경우 초기불량으로 판정되지 않습니다.
● 미사용 초기 불량건은 구매일로부터 10일 이내에 팰콘샵에 도착시 무상 교환 처리되며, 왕복 배송비는 팰콘샵이 부담합니다.
● 미사용 초기 불량건은 구매일로부터 10일 이후 30일 이내 팰콘샵에 도착시 30% 할인 보상판매 처리되며, 왕복 배송비는 손님이 부담합니다.
● 미사용 초기 불량건은 구매일로부터 30일 이후 60일 이내 팰콘샵에 도착시 20% 할인 보상판매 처리되며, 왕복 배송비는 손님이 부담합니다.
● 미사용 초기 불량건이라도 구매일로부터 60일 이후에는 A/S 및 보상판매가 불가합니다.
● 초기 불량이 아닌 제품은 구매일로부터 10일 이후 30일 이내 팰콘샵에 도착시 20% 할인 보상판매 처리됩니다.
● 초기 불량이 아닌 제품은 구매일로부터 30일 이후에는 A/S 및 보상판매가 불가합니다.
하비윙 변속기 워런티 조건
● 구입한 지 60일 이내의 하비윙 변속기로, 팰콘샵에서 구입한 제품에 한정됩니다.
● 변속기 제품 박스에 붙어있는 워런티 코드(Warranty Code) 및 변속기 자체에 붙어있는 워런티 코드를 제거하거나 식별 불가시 워런티가 제한됩니다.
● 변속기를 개조한 경우(배터리 잭 단자 변경 포함) 워런티가 제한됩니다.
● 사용 부당으로 인한 고장(배터리 단자 잘못 연결, 비 방수 변속기에 물 들어감, 충격으로 인한 파손 등)은 워런티가 제한됩니다.
● 제품 초기 불량유무는 팰콘샵으로 제품이 도착해야 확인할 수 있습니다.
● 제품 박스 손상이나 구성품(설명서, 케이블타이, 전선 등) 중 하나라도 유실/훼손시 제품 초기 불량이라 하더라도 반품 및 교환이 제한됩니다.