Àû¸³±Ý : 3,150¿ø

»óǰ»ó¼¼¼³¸í
Same mounting dimensions as the O.S. Max .61FX Advanced Bi-Metallic Liner process uses a double layer of plating material rather than one thick layer.INCLUDES |
O.S. Max 75 AX ABL Aircraft Engine with E3010 muffler, carburetor,
8 glow plug, illustrated instruction manual
SPECIFICATIONS |
Displacement: 0.75 cu in (12.3cc)
Bore: 1.02 (25.8mm)
Stroke: 0.93 (23.5mm)
Practical RPM: 2,000-16,000 RPM
Power Output: 2.4 PS, 2.37HP15,000 RPM
Weight: 20.39 ounces (578g) wo muffler
26.46 ounces (750g) w muffler
Recommended Props: 14x6, 14x8, 15x7
Crankshaft thread size: 516-24
Distance from center of engine to drive hub: 2.62 (66.6mm)
Distance between exhaust bolt mounting holes 42mm
Height from crankcase bottom to top of cylinder head: 4.07 (103.5mm)
Heightcrankshaft center to top of cylinder head: 3.20 (81.5mm)
Width including mounting tabs: 2.4 (61mm)
Width not including mounting tabs: 1.67 (42.6mm)
Width between mounting holes same side: .98 (25mm)
Width between mounting holes opposite side: 2.04 (52mm)
Diameter of muffler body: 1.92 (48.8mm)
Angle of muffler in relation to engine: 4
Length from end of crankshaft to back of crankcase 5.09 (129.5mm)
High Speed Needle: 1.5 - 2 turns out from fully closed
Low Speed Needle: 2mm gap between the needle and spray bar at full
throttle (looking down the neck of the carb)