PC버전
![[팰콘샵] 루메니어 QAV-S 2 JohnnyFPV SE 7인치 프레임킷](/shop/data/goods/1711441179666.png)
적립금 : 1,980원
상품상세설명
키트/PNP 제품 구입시 주의사항
● 제품 상세 설명을 반드시 참고하셔서 제품 구성품에 주의하십시오.
● KIT, ARF, PNP, COMBO 제품은 조종기가 포함되어 있지 않습니다.
● 모든 PNP 제품은 발송 전 개봉하여 각 전자장치 (서보, 모터, 변속기, 리트렉트, LED) 작동 테스트 후 발송됩니다.
● 받으신 제품의 박스 개봉 후에는 단순 변심이나 잘못된 주문으로 인한 반품/교환이 불가합니다.
● 아래 내용은 KIT, ARF, PNP 의 일반적인 제품 구성이며, 정확한 구성품은 각 제품의 상세 설명을 참고하십시오.
- KIT (키트) / ARF : 기체의 프레임(껍데기)와 하드웨어(링키지 등)만 있으며, 전자 기자재는 일체 미포함
- PNP : 기체의 프레임 및 전자 기자재(모터, 변속기, 서보 등)가 함께 포함(또는 조립완료) 되어 있음. 송수신기 및 배터리 관련은 미포함.
- BNF : 기체의 프레임 및 전자 기자재(모터, 변속기, 서보, 수신기)가 조립 완료되어 있음. 조종기는 미포함이며, 특정 조종기만 사용 가능.
Lumenier QAV-S 2 JohnnyFPV SE 7” Frame Kit
- 루메니어 죠니에디션이 출시되었습니다.
- 7인치 프레임입니다.
구성품
하단 사진 참조
About this product
Introducing the Lumenier QAV-S 2 JohnnyFPV Special Edition frame, a cutting-edge masterpiece designed to elevate your FPV drone experience.
This frame boasts an innovative X-Lock arm retention system featuring a lateral locking mechanism that enhances rigidity and ease of use.
The arms can effortlessly fold with only one screw per side. The frame's aluminum FPV camera protection ensures superior camera support,
with customizable carbon plates compatible with various cameras, including vibration isolation options optimized for image stabilization.
With 6mm thick arms, the QAV-S 2 7" frame achieves an unparalleled balance of durability and weight at 182g (frame only).
Capture stunning footage with the injection-molded GoPro mount, compatible with the industry-standard pattern.
It maintains backward compatibility with QAV-S series mount patterns, providing flexibility for users.
The O3 compatible mounting system adds versatility, allowing direct mounting of the O3 air unit, supported by a 5mm full aluminum mounting kit for optimal wire routing.
The adjustable aluminum XT60 and accessory mount at the rear provide options for hard-mounted XT60 connection and various accessory placements, ensuring adaptability for antennas,
GPS, and rear-facing action cameras. Elevate your FPV cinematography with the Lumenier QAV-S 2 JohnnyFPV Special Edition frame - where innovation meets performance!
![[팰콘샵] 루메니어 QAV-S 2 JohnnyFPV SE 7인치 프레임킷](https://www.susungrc.com/web/upload/NNEditor/20240311/image.png)
메뉴얼
https://blog.naver.com/susungrc/223381018836Features
-
Made in Collaboration with expert FPV pilot JohnnyFPV
-
Frame made of High-Quality Lumenier components
-
Adjustable Aluminum XT60 and Accessory Mount
-
Backward-compatible mounting patterns
-
Aluminum FPV Camera Protection
-
Balanced Durability and Weight
-
Injection-Molded GoPro Mount
-
DeadCat Arm Configuration
-
O3 Compatible Mounting
-
Arm Braces for Rigidity
-
X-Lock Arm Retention
Specifications
Rear Stack Dimensions : 20x20 (potentially 30x30 with adapter)
Custom Parts : 6061 Aluminum (Bronze Gold)
Standoffs : 7075 Aluminum (Bronze Gold)
Screws : Black Zinc Steel 12.9 grade
Weight : 182g (without accessories)
Middle Stack Dimensions : 30x30
Arm : 6mm 3K Carbon Fiber
Frame Size : 220mm
IMPORTANT NOTES
The new QAV-S 2 arms will work with the original QAV-S frame, but the original QAV-S arms will not work with the new QAV-S 2 frame.
![[팰콘샵] 루메니어 QAV-S 2 JohnnyFPV SE 7인치 프레임킷](https://www.susungrc.com/web/upload/NNEditor/20240311/QAV-S-2-JohnnyFPV-SE-7inch_Frame-Kit_10.png)
![[팰콘샵] 루메니어 QAV-S 2 JohnnyFPV SE 7인치 프레임킷](https://www.susungrc.com/web/upload/NNEditor/20240311/QAV-S-2-JohnnyFPV-SE-7inch_Frame-Kit_9.png)
Lumenier QAV-S 2 JohnnyFPV SE 7” Frame Kit
1x JohnnyFPV QAV-S 2 Rear GoPro Mount Plate Dual Antenna
1x JohnnyFPV QAV-S 2 Rear GPS Dual Antenna Mount Plate
1x JohnnyFPV QAV-S 2 Battery Pad (Black Silicon Rubber)
1x JohnnyFPV QAV-S 2 Rear Adjustable Mount Right
2x JohnnyFPV QAV-S 2 Camera Plate for Grommets
1x JohnnyFPV QAV-S 2 Rear Adjustable Mount Left
1x JohnnyFPV QAV-S 2 Rear GPS XT60 Mount Plate
1x JohnnyFPV QAV-S 2 20mm Camera Plate Right
1x JohnnyFPV QAV-S 2 20mm Camera Plate Left
1x JohnnyFPV QAV-S 2 Rear GoPro Mount Plate
1x JohnnyFPV QAV-S 2 Rear FPV Antenna Plate
1x JohnnyFPV QAV-S 2 Pro Mount Spacer Plate
1x JohnnyFPV QAV-S 2 Rear Base Mount Right
1x JohnnyFPV QAV-S 2 Aluminum Guard Right
1x 14 Gauge Silicon Wire (Pair, Red and Black)
1x JohnnyFPV QAV-S 2 6mm FC Isolator 6mm
1x JohnnyFPV QAV-S 2 Rear Base Mount Left
1x JohnnyFPV QAV-S 2 Aluminum Guard Left
2x JohnnyFPV QAV-S 2 6mm Arm Wedge
2x JohnnyFPV QAV-S 2 7 Inch Arm Brace
2x JohnnyFPV QAV-S 2 7 Inch Arm Front
2x JohnnyFPV QAV-S 2 7 Inch Arm Rear
1x JohnnyFPV QAV-S 2 Split Plate Front
1x JohnnyFPV QAV-S 2 Split Plate Rear
1x Lumenier QAV-PRO Gopro Mount
2x 5mm O3 Air Unit Mount 20mm
1x JohnnyFPV QAV-S 2 Top Plate
2x Heatshrink 5mm Diameter
2x Lumenier Battery Strap
4x Knurled Standoff
1x XT60E-M (Black)
1x Hardware Set
4x Foam Pads
