① 99.9% 실재고 관리매일 밤 자동 갱신, 유령 재고 NO! 보이는 수량이 진짜입니다.
② 22년 전문가 직답국내 최고 전문가가 막힘없이 즉시 해결해 드립니다.
③ 확실한 기술 지원국내 최고 수준의 노하우로 막힘없는 솔루션을 제공합니다.
④ 출고 전 전수 촬영출고 전 제품 사진 기록으로 오배송 및 누락을 원천 차단합니다.
⑤ 실시간 배송 일정주문 확인 즉시 발송 예정일을 카톡으로 먼저 알려드립니다.
⑥ Since 2004 신뢰22년을 한결같이 지켜온 믿음. 걱정 없이 이용하세요.
키트/PNP 제품 구입시 주의사항
● 제품 상세 설명을 반드시 참고하셔서 제품 구성품에 주의하십시오.
● KIT, ARF, PNP, COMBO 제품은 조종기가 포함되어 있지 않습니다.
● 모든 PNP 제품은 발송 전 개봉하여 각 전자장치 (서보, 모터, 변속기, 리트렉트, LED) 작동 테스트 후 발송됩니다.
● 받으신 제품의 박스 개봉 후에는 단순 변심이나 잘못된 주문으로 인한 반품/교환이 불가합니다.
● 아래 내용은 KIT, ARF, PNP 의 일반적인 제품 구성이며, 정확한 구성품은 각 제품의 상세 설명을 참고하십시오.
- KIT (키트) / ARF : 기체의 프레임(껍데기)와 하드웨어(링키지 등)만 있으며, 전자 기자재는 일체 미포함
- PNP : 기체의 프레임 및 전자 기자재(모터, 변속기, 서보 등)가 함께 포함(또는 조립완료) 되어 있음. 송수신기 및 배터리 관련은 미포함.
- BNF : 기체의 프레임 및 전자 기자재(모터, 변속기, 서보, 수신기)가 조립 완료되어 있음. 조종기는 미포함이며, 특정 조종기만 사용 가능.
[Tarot] MARK4-10
Racing Drone Super Combo(6S/10in)
타롯사의 최신 10in 프롭을 사용하는 대형 레이싱 드론 Mark4-10 드론 Super Combo
Package!
Heavy Lift 사양으로서 카본 본체 및 T3115-900KV 모터, 10x5.0 프롭, JHEMCU FC/60A 4in1 ESC
System, 그리고 Runcam사의 Phoenix2 액션캠이 모두 포함된 패키지 사양입니다.
배터리는 6,000~6,300mAh 6S1P 팩을 사용하시면 됩니다.
·Tarot's new 10-inch FPV racing drone;
·Made of high quality 3K twill carbon fiber board, strong and durable;
·Exquisite appearance design, is the preferred rack for FPV racing drone;
1.H-frame structure design, shorten the length of the arm, reduce the weight and
increase the strength of the arm;
2.Large center plate mounting space, arm mounting option to the bottom, more
installation space can be obtained;
3.Front-end FPV lens mounting position size adjustment standard 19mm * 19mm;
4.The middle of the Flight Controller&ESC mounting position and the rear of the
Transmission mounting position reserved for 30.5mm * 30.5mm and 20mm * 20mm
mounting holes, providing more options;
5.Standard with vibration damping silicone, which can reduce the pressure of
vibration to the flight control to a greater extent, so as to achieve smooth
flight.
Frame type: H type
Maximum supported props: 10inch
Wheelbase:427mm
Dimension: 331mm*269mm
Weight: 238g
Bottom plate thickness: 3mm
Top plate thickness: 3mm
Arm thickness: 7.5mm
Camera mounting pitch: 19mm
Installation hole distance of the transmission: compatible with 30.5mm/20mm
Flight control installation hole distance: compatible with 30.5mm/20mm
Flight control: RF/KISS/F3/F4/F7