휴대폰 Core Compartment 제조업체로 유명한 Xenon-Tech에서 출시한 Gen2/DSMP 방식의 고성능 Spektrum 수신기 시리즈가 거품을 좌악~ 뺀 가격에 국내 독점 공급합니다!
RX Officer로 최고의 명성을 가지고 있는 "Frederick Mak"에 의해 시스템을 완전히 재 설계, 아울러 Xenon-Tech에서 휴대폰 컴파트먼트 레벨의 SMD Processing으로 제작, 저가형 중국산 호환 수신기와는 비교할 수 없는 품질관리로 생산 됩니다.
Xenon-Tech의 신형 플랫폼인 "DiversityTM " 시리즈는 기존의 스펙트럼 수신기에서 보다 업그레이드된 독립적인 프로세서를 탑재한 듀얼 안테나를 내장, 실질적으로 두 개의 위성 수신기를 장착한 상태와 동등(DiversityTM 위성 수신기와 6/7/10Ch DiversityTM 수신기 조합시 최대 4개의 위성 수신기 장착한 수신율과 동일)한 수신율을 보증하며 기존 위성 수신기 대비 60%의 수신 감도 Upgrade 성능을 나타냅니다.
(Diversity 안테나는 서로 독립적인 Processor로 동작하며 Reduncancy 방식으로 한쪽의 수신감도가 좋지 않을 경우 자동으로 반대쪽 안테나의 수신율을 스위칭 하도록 설계)
Xenon-Tech의 모든 컴포넌트는 Spektrum 조종기와 완벽한 호환성 가지고 있으며, DSMP를 지원하는 멀티콥터 FC 및 헬기용 메이저 3축 자이로인 ALIGN 3GX, 독일 Beast-X 및 V-Bar와도 환상적인 궁합을 보증합니다.
멀티콥터 및 UAV에 사용시 최대 2.6mile(~4.16Km) 레인지까지 통달이 가능하며 Fail Safe를 완벽하게 지원, Going Home을 지원하는 FC와 조합시 안전하게 리턴 홈이 됩니다.
(주의 : 전파의 통달 거리는 도심지와 같이 전파 환경이 좋지 않은 곳에서는 레인지가 짧아질 수 있습니다)
* Highlight
Lemon Rx GEN2 DSMP satellite receiver is DSMX/DSM2 compatible that provides superior performance with antenna diversity. Bind button allows binding to the transmitter without having a receiver. The satellite comes with 25cm JST connector wire (not shown in photo) for the convenience of connecting it to a Lemon Rx GEN2, Flight Controller or Spektrum receiver.
- Dimension: 23mm x 22.5mm x 9mm - 4.1 grams (with casing) - 2.7V to 3.5V voltage input - Bind button allows binding without a receiver nor require special initialization sequence such as using flight controller - Generation 2 SDR stack ensures the fastest channel searching and advanced algorithm for signal recovery with ultra-low-latency experience - Best suited to application that requires excpetional signal performance under signal fading condition such as drone - Antenna diversity improves the reliability of the wireless link
* Quick Reference Guide
Binding with receiver - Connect the DSMP satellite to DSMP receiver - Prepare the receiver in bind mode with satellite connected - Power cycle the receiver will cause both receiver and satellite in bind mode with LED flashes.
Binding without receiver - Connect the DSMP satellite to an appropriate device such as Flight Controller and make sure there is power provided to the satellite - Hold the B button on the satellite for about 3 seconds. The LED flashes indicate satellite is ready to bind to a transmitter without a receiver connected.
Flight Controller - Choose DSMX 2048 on the flight controller for protocol - Do not use SRXL2 interface. LM0037A acts as a receiving device only for flight controller and does not have telelemtry feature.