① 99.9% 실재고 관리매일 밤 자동 갱신, 유령 재고 NO! 보이는 수량이 진짜입니다.
② 22년 전문가 직답국내 최고 전문가가 막힘없이 즉시 해결해 드립니다.
③ 확실한 기술 지원국내 최고 수준의 노하우로 막힘없는 솔루션을 제공합니다.
④ 출고 전 전수 촬영출고 전 제품 사진 기록으로 오배송 및 누락을 원천 차단합니다.
⑤ 실시간 배송 일정주문 확인 즉시 발송 예정일을 카톡으로 먼저 알려드립니다.
⑥ Since 2004 신뢰22년을 한결같이 지켜온 믿음. 걱정 없이 이용하세요.
Holybro
H-RTK F9P Base
H-RTK F9P is the latest differential high-precision GNSS positioning system series from Holybro.
This system provides multi-band RTK with fast convergence times and reliable performance,
concurrent reception of GPS, GLONASS, Galileo and BeiDou, and fast update rate
for highly dynamic and high volume applications with centimeter-accuracy.
It uses a UBLOX F9P module, a IST8310 compass, and a tri-colored LED indicator.
It also has a integrated safety switch for a simple and convenient operation.
PX4 Autopilot users:
The GPS RGB LED Driver Chip has been updated. Ensure the PX4 firmware is Stable Release v1.12.2 or newer for proper LED driver Support.
Ardupilot User:
If unable to preform normal compass calibration "compass dance" for any reason, set parameter COMPASS_ORIENT=6 (Yaw270) for proper compass orientation.
Specification
Application - Base station only
GNSS - GPS L1C/A(1575.42MHz)
- GPS L2C(1227.60MHz)
- GLONASS L1OF(1602MHz)
- GLONASS L2OF(1246MHz)
- BeiDou B1(1561.098MHz)
- BeiDou B2(1207.140MHz)
- Galileo E1-B/C(1575.42MHz)
- Galileo E5b(1207.140MHz)
Antennas Peak Gain (MAX) - 5.5dBi
LNA Gain(typical) - 40±2dB
Time-TO-First Fix - Cold start:≤24s
- Hot start:≤1s
RTK-SurveyIn-Time - ≤5 minute @1.5mCEP
Data and Update Rate -RAW:20Hz Max
-RTK:8Hz Max
-Moving Base RTK:5Hz Max
Port - Port 1:GH1.25 10-pin
- Port 2:USB Type-c
Antenna Connection Type -Board: SMA female
-Antenna: TNC female
-Male-male SMA-TNC cable length: 5m (included)
Baud rate: - 115200 5Hz (default) can be set
Working voltage: 4.75V~5.25V
Dimensions - Board: 34.8*52.7*12.9mm
- Antenna Diameter: 152mm
- Antenna height: 62.2mm
Weight - 469g
Note: GPS2 port on both Pixhawk & Cube does not support Safety Switch function. You can use an external safety switch
or disable the safety switch on ground control station application.
Note: GPS2 port on both Pixhawk & Cube does not support Safety Switch function.
You can use an external safety switch or disable the safety switch on ground control station application.