① 99.9% 실재고 관리매일 밤 자동 갱신, 유령 재고 NO! 보이는 수량이 진짜입니다.
② 22년 전문가 직답국내 최고 전문가가 막힘없이 즉시 해결해 드립니다.
③ 확실한 기술 지원국내 최고 수준의 노하우로 막힘없는 솔루션을 제공합니다.
④ 출고 전 전수 촬영출고 전 제품 사진 기록으로 오배송 및 누락을 원천 차단합니다.
⑤ 실시간 배송 일정주문 확인 즉시 발송 예정일을 카톡으로 먼저 알려드립니다.
⑥ Since 2004 신뢰22년을 한결같이 지켜온 믿음. 걱정 없이 이용하세요.
DL Power Mini Tachometor (디지탈RPM 측정기)
1. Use PIC16f628a microcontrollers 2. Do not need batteries,Power from the ignition 3. Standard FUTABA plug(Black-Negative Red-Positive and White-Signal) 4. Using high-brightness LED digital tube. 5. Input voltage range:3.5V-8.4V 6. Current consumption 25mA-60mA 7. Mini tachometer indicates up to 30000 rpm 8. Actual RPM= Display Digital *10 9. Body Size: 41mm L x 17mm W x 12mm H 10.Window Size: 30mm L x 15mm H 11.Weight:8.5g (0.3OZ)
Instructions:
1.The Y wiring tandem between in the HALL sensor and the ignition. 2.The tachometer plug the other end with Y wire. 3.Connected to ignition power supply and can be displayed
Note: That connecting plugs do Reinforcement. To prevent vibration. The hall sensor & tachometer wire Leave from the Ignition high-voltage wire, And receiver wires over 30cm
Connection tachometer is not recommended after the use of flight, Best to remove the Y wire to restore the original sensor connection
If ignition have an additional tachometer pinout. You must be connected to dedicated tachometer signal wire.
신형 이그니션에는 Mini Tachometor 를 연결하는 잭이 따로 나와있지만 구형 이그니션에는 없습니다. 구형 이그니션에 사용하실때는 그림과 같이 사용하시면 됩니다.