① 99.9% 실재고 관리매일 밤 자동 갱신, 유령 재고 NO! 보이는 수량이 진짜입니다.
② 22년 전문가 직답국내 최고 전문가가 막힘없이 즉시 해결해 드립니다.
③ 확실한 기술 지원국내 최고 수준의 노하우로 막힘없는 솔루션을 제공합니다.
④ 출고 전 전수 촬영출고 전 제품 사진 기록으로 오배송 및 누락을 원천 차단합니다.
⑤ 실시간 배송 일정주문 확인 즉시 발송 예정일을 카톡으로 먼저 알려드립니다.
⑥ Since 2004 신뢰22년을 한결같이 지켜온 믿음. 걱정 없이 이용하세요.
ZMR NX4 EVO Gyro Fixed Wing flight Control Board - 비행기자이로 가로핀
- 비행기 수평을 잡아주는 자이로 입니다.
NX4 EVO Flight Controller:
Product parameters:
Input voltage: DC 5 – 6V
Working temperature: 0-50 ° C
Dimensions (length, width and height): 43x28x15mm
Weight: 11g Product performance:
This product has, horizontal self-stabilization, manual flight, 3D lock, one-button rescue.
This product supports: ordinary T-tail fixed wing, single aileron, double aileron, delta wing, V tail and other aircraft types.
Quick installation tips:
1. Refer to the instruction manual for correct connection and check whether the remote control is working properly.
2. Adjust the DIP switch to select the correct model. And check whether the control surface of the remote control is normal.
3. Adjust the working direction and sensitivity of the gyroscope through the potentiometer switch, and check whether the working direction of each rudder surface of the gyroscope is correct. (Please use sensitivity for the first flight)
4. Set up one-button rescue (refer to the instruction manual, when the one-button rescue is turned on, the elevator must be tilted upwards and then back to level, otherwise it needs to be set separately)
5. Calibrate the neutral point of the remote control through the remote control mode switch. (When replacing the remote control or receiver, the neutral point must be calibrated)